Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
guides:repair:mdsje5x0chuckinswitch [2022/07/26 02:50] – created dustinrueguides:repair:mdsje5x0chuckinswitch [2024/01/18 03:39] (current) – [Required] slxtxbox
Line 3: Line 3:
 This guide describes how to replace the "chuck in" microswitch on the Sony MDS-JE500 and MDS-510. Other units may be affected by this, please update the wiki for any additional models affected by this issue. This guide describes how to replace the "chuck in" microswitch on the Sony MDS-JE500 and MDS-510. Other units may be affected by this, please update the wiki for any additional models affected by this issue.
  
-Models with this issue with continuously attempt to eject an otherwise empty mechanism potentially leading to grinding gears and long term damage. Generally, placing a disk into the device will allow it to behave normally.+Models with this issue will continuously attempt to eject an otherwise empty mechanism potentially leading to grinding gears and long term damage. Generally, placing a disk into the device will allow it to behave normally.
  
 There are guides out there that will have you bend a tab so that it lands on the microswitch differently. I don't recommend this trick as it is short lived and the switch will quickly wear out in the new spot. Replacing the switch completely is best way to ensure you have a long lasting fix. There are guides out there that will have you bend a tab so that it lands on the microswitch differently. I don't recommend this trick as it is short lived and the switch will quickly wear out in the new spot. Replacing the switch completely is best way to ensure you have a long lasting fix.
Line 10: Line 10:
 ==== Required ==== ==== Required ====
  
-To perform this repair you will need basic tools including multiple phillips screw driver tips, soldering iron and replacement microswitches. This switch available at [https://www.digikey.com/en/products/detail/c-k/SDS004/1949299] is an exact but improved replacement part. This same part is used for the "chuck in" switch as well as the laser sled to indicate it is in the fully "in" position.+To perform this repair you will need basic tools including multiple phillips screw driver tips, soldering iron and replacement microswitches. This switch (the SDS-004) available at [https://www.digikey.com/short/15tn9f74/ ] is an exact but improved replacement part. This same part is used for the "chuck in" switch as well as the laser sled to indicate it is in the fully "in" position.
  
 ==== Guide ==== ==== Guide ====
  • guides/repair/mdsje5x0chuckinswitch.1658803830.txt.gz
  • Last modified: 21 months ago
  • by dustinrue