Kenwood DPX-8100MJi


Name DPX-8100MJi
Manufacturer Kenwood
Released 2000/06
Device type auto
Recorder Player
NetMD No
Hi-MD No
Radio Yes
Dimensions 2-Din 178 (W) x 100 (H) x 155 (D) mm
Weight 3300
Battery notes
Sidecar (depr)
Voltage 12
Power cable
Price (launch)
¥94 500

“DPX-8100MJi” is an MD changer/CD receiver that uses an electric full open panel system. The large display, unique to 2DIN, is equipped with a beautiful “hyper cross light display” that alternately arranges the luminescent colors of the spectrum analyzer display tube. In addition, like the DPX - 9100MJi, it has a built-in mobile phone hands-free function that can automatically receive calls . .

Equipped with a newly developed high-performance pickup and high-precision servo circuit, it can also read music signals recorded not only on CD-R but also on CD-RW *2 . The 2DIN size body is equipped with a bank-type 3+1 in-dash MD changer that allows you to enjoy up to 3 MDs as a changer. . Equipped with “Digital Direct” that directly inputs digital signals to the DSP for high-quality CD/MD playback. Digital sound quality is further improved by reducing the number of signal conversions. Equipped with a hybrid DSP that allows you to enjoy a variety of sound qualities, and a built-in 47W x 4ch ultra-high power amplifier. Includes remote control.

*1: CA-HF100 (for normal mobile phones) and CA-HF200 (for cdmaOne), both 5,000 yen, excluding tax *2: MP3 data playback is not supported.

[MD department]

  • Frequency response: 20Hz to 20kHz (±1dB)
  • S/N ratio: 93dB (1kHz)
  • Dynamic range: 93dB
  • Stereo Separation: 85dB

[CD section]

  • Frequency response: 10Hz to 20kHz (±1dB)
  • S/N ratio: 95dB (1kHz)
  • Dynamic range: 95dB
  • Stereo Separation: 88dB

[FM section]

  • Receiving frequency range: 76.0MHz to 90.0MHz (100kHz steps)

[AM section]

  • Receiving frequency range: 522kHz to 1629kHz (9kHz steps) Sensitivity: 28dBμ

[EQ section]

  • Equalizer center frequency: 60,120,250,500,1k,2k,4k,8k,16kHz
  • Variable range: ±12dB

[Audio part]

  • Maximum output: 47W x 4
  • Rated output: 29W x 4 (4Ω, 1kHz, 10%THD)
  • Pre-out level: 1500mV (FM/10kΩ)

[Common part]

  • Power supply voltage: 14.4V (11 to 16V)
  • Maximum current consumption: 10A
  • Embedded dimensions: 178 (W) x 100 (H) x 155 (D) mm
  • Mass: 3.3kg

Content adapted from: Kenwood Press Release (archived)

Submit your own! Edit the page, use the photo submission form, or Contact us.

You could leave a comment if you were logged in.
  • equipment/kenwood/auto/dpx-8100mji.txt
  • Last modified: 3 months ago
  • by specialk