Kenwood E212MD
1DIN size MD receiver that supports MDLP / NetMD. The maximum output of the amplifier is 45W x 4ch, and the rated output is 28W x 4ch (at 4Ω). It also has a built-in FM / AM tuner. “DB equalizer” and “rotary encoder” are also installed, but “Supreme” is not installed.
[MD part]
- Frequency characteristics 20Hz to 20kHZ (± 2dB)
- S / N ratio 90dB (1kHz)
- Dynamic range 90dB
- Stereo separation 85dB
[FM part]
- Reception frequency range 76.0MHz-90.0MHz (100kHz step)
- Practical sensitivity 9.3dBf (0.8μV / 75Ω)
- Frequency characteristics 30Hz-15kHz ( ± 3.0dB)
- Stereo separation 40dB (1kHz)
[AM part]
- Reception frequency range 522kHz to 1629kHz (9kHz step)
- Sensitivity 28dBμ (25μV)
[Audio part]
- Maximum output 45W x 4
- Rated output 28W x 4 (4Ω) , 1kHz, 10% THD or less)
[Common part]
- Power supply voltage 14.4V (11 ~ 16V)
- Maximum current consumption 10A
- Embedded size 178W × 50H × 160Dmm
- Mass 1.1kg
Content adapted from: AV Watch Kenwood Press Release
Manuals
Repair
Photos
You could leave a comment if you were logged in.